Microglider Mig torch
Welding further away from the welding machine
.jpg) |
In order to enable welding at distances greater than 5 metres from the welding machine, Translas now supplies the new 7XM torches in combination with a new wire transport system: the 7XM-MG torch. This new system named Microglider (MG) transports the welding wire over greater distances with almost no friction. The use of this wire transport system in cable assemblies longer than 5 metres means that the distance from the welding machine is no longer a limitation. This increases the welder’s work radius considerably, especially in spaces which are difficult to access, and you no longer have to keep moving the welding machine or wire unit. Furthermore, the system makes heavier, bigger push-pull torches unnecessary. | |
(1).jpg) |
This new Microglider wire transport system is built of plastic segments, in which the wire is transported over plastic rollers with hardly any friction. Translas is integrating the new system in its cable assembly for welding wire up to 2 mm Ø. The new wire transport system replaces the standard wire transport cable and inner coil in the Translas concept. One significant advantage is that the segments of the Microglider can be replaced at a later stage and the complete liners can be reused. |
|
(1).jpg) |
The benefits of the Microglider wire transport system:
|
contact
Translas BV
Fahrenheitbaan 2
3439 MD Nieuwegein
The Netherlands
Email.: info@translas.com
Tel.: +31 (0)30 - 604 73 73
Fax: +31 (0)30 - 605 06 38
